Time Reduction and Analysis of Machining Process for Differential Case
| Author(s) | : | Bhatt Hardik K, Jay K. Pandya, Sanjay Gajjar |
| Institution | : | Mechanical Engineering Department, HJD-ITER Kera-Kutch |
| Published In | : | Vol. 2, Issue 5 — May 2015 |
| Page No. | : | 1158-1167 |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
Differential casing is an important component of an automobile. It is first casted with sand casting and thentwo machining process (i.e.) milling and turning are carried out on it. In this project the machine development process isintroduced. In which the milling and turning operation are combined together to form a same differential. As a result ofwhich the production will be increased, reduce loading/unloading time, reduce lead time, increase surface finish andreduce cost per component of differential case. The main aim of this study is to reduce cost per differential casecomponent by reducing cycle time and improving accuracy in low cost then current machining process.For this combined machining operation a new design of jaws of chuck is designed for the ATM machine with sameoperational sequence with turning and milling machining operations which results in optimum machining time. Comparethe old machining cycle time with the new developed machining cycle time.
Bhatt Hardik K, Jay K. Pandya, Sanjay Gajjar, “Time Reduction and Analysis of Machining Process for Differential Case”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 2, Issue 5, pp. 1158-1167, May 2015.
