EXPERIMENTAL INVESTIGATION OF TOOL WEAR IN TURNING OF INCONEL718 MATERIAL-REVIEW

Authors

  • Ramesh kannan.C Faculty, Department of Mechanical Engineering, Anna University Regional centre, Madurai
  • Prathap.J P.G Scholar, Mechanical Engineering Department, Anna University, Madurai
  • Pamanabhan.P Principal, V.V. Engineering college, Tisaiyanvilai

Keywords:

Inconel718, turning, tool wear, tool treatment, vibration

Abstract

In this paper focus the experimental investigation of tool wearin turning of inconel718. This review paper is
the optimization of input parameter like cutting speed, feed rate, and depth of cut. The different cuttingconditions tool
geometry and tool treatment are used to reduce the tool wear. The output parameters arecutting force, cutting
temperature, vibration,power consumption, surface roughness and material removal rate.To analysis the tool wear
based on the literature review to continue the machining of inconal718work material using Computer Numerical
Control (CNC)machine .To analysis the experimental and predicted values in selected optimization method to reduce the
tool wear.

Downloads

Published

2015-09-25

How to Cite

Ramesh kannan.C, Prathap.J, & Pamanabhan.P. (2015). EXPERIMENTAL INVESTIGATION OF TOOL WEAR IN TURNING OF INCONEL718 MATERIAL-REVIEW. International Journal of Advance Engineering and Research Development (IJAERD), 2(9), 31–36. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/1015

Issue

Vol. 2 No. 9 (2015): Volume 2 Issue 9, September 2015

Section

Articles