REAL-TIME DATA ACQUISITION OF PRESSURE, HUMIDITY, MOISTURE AND TEMPERATURE USING SENSORS

Authors

  • Sasha S M.Tech, Signal Processing, Dept. of EIE, BIT, Bengaluru-560004
  • Vidya S S Professor, EIE Dept.,Bangalore Institute of Technology,Bangalore 560004
  • Dr Suresh H N Professor & Coordinator for PG Studies and Research,Dept. Of Electronics & Instrumentation, BIT, Bengaluru-560004

Keywords:

GPRS, UART, Cloud storage, GUI, Dropbox

Abstract

A prominent research is going on the real-time data acquisition.. Various researchhad done on the offline
data acquisition and it has a major problem of analysing the data online. Since the real-time data acquisition is the
newer approach in this area. It gives the real-time data and we can get it at the same time. In this project it is proposed
to use the pressure, moisture, humidity and temperature sensors to get the data online. The GPRS is used to get the data
online from the cloud. From the moisture content which is detected from the sensor, the DC motor runs with the help of
motor driver. The values of the data displays using LCD display.

Downloads

Published

2016-05-25

How to Cite

Sasha S, Vidya S S, & Dr Suresh H N. (2016). REAL-TIME DATA ACQUISITION OF PRESSURE, HUMIDITY, MOISTURE AND TEMPERATURE USING SENSORS. International Journal of Advance Engineering and Research Development (IJAERD), 3(5), 674–678. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/1607

Issue

Vol. 3 No. 5 (2016): Volume 3 Issue 5 May-2016

Section

Articles