DESIGN AND STRESS ANALYSIS OF A SIMPLIFIED CREEP TESTING MACHINE

Authors

  • Ajithmon Anto Mechanical Engineering Department, AmalJyothi College of Engineering, anto
  • Bini Koshy Varghese echanical Engineering Department, AmalJyothi College of Engineering

Keywords:

Creep testing machine, Lever arm, CATIA software, FEM, von Mises stress

Abstract

This paper presents a design of a simplified creep testing machine. During creep testing operation the parts of the
creep testing machine may undergo heavy loads. It is necessary to ensure that the machine parts do not fail during the
operation. The deformation of the parts should be very low otherwise it will lead to errors in the results of the creep test. In
this study a creep testing machine was designed and stress analysis of its important components was done. The study presents
a practical application methodology in FEM analysis for the mechanical parts design. The CATIA Analysis software is used
for FEM analysis.

Downloads

Published

2014-09-25

How to Cite

Ajithmon Anto, & Bini Koshy Varghese. (2014). DESIGN AND STRESS ANALYSIS OF A SIMPLIFIED CREEP TESTING MACHINE. International Journal of Advance Engineering and Research Development (IJAERD), 1(9), 85–92. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/255

Issue

Vol. 1 No. 9 (2014): Volume 1 Issue 9 (September-2014)

Section

Articles