Optimization of Defects Encountered in Manufacturing of Radiator

Authors

  • Prof. Jalpesh Solanki M.TECH [Heat Power &Thermal Engg.]Assistant Professor, Department of Mechanical Engineering, Darshan Institute of Engineering &Technology
  • Prof. Hardik Acharya .E. [Mechanical] Assistant Professor, Department of Mechanical Engineering, Darshan Institute of Engineering &Technology
  • Prof. Ajay Bhimani B.E. [Mechanical] Assistant Professor, Department of Mechanical Engineering, Darshan Institute of Engineering &Technology

Keywords:

Radiator, Assembly, Manufacturing, Cost

Abstract

Radiator is equipment which helps engine to cool down by heat transfer of engine heat to coolant& from
coolant to the atmosphere. Radiators are used to cool large size engines. A water jacket is provided around which the
coolant is provided so due to heat realized from the engine the coolant gets heated up & is cooled down by the radiator.
The problems occurring during the assembly or during the manufacturing process are being studied and their possible
solutions in this paper. It may also help in increasing the efficiency of manufacturing process and the cost reduction of
the radiator by costing parameters

Downloads

Published

2014-09-25

How to Cite

Prof. Jalpesh Solanki, Prof. Hardik Acharya, & Prof. Ajay Bhimani. (2014). Optimization of Defects Encountered in Manufacturing of Radiator. International Journal of Advance Engineering and Research Development (IJAERD), 1(9), 134–139. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/267

Issue

Vol. 1 No. 9 (2014): Volume 1 Issue 9 (September-2014)

Section

Articles