OPTIMIZATION OF MATERIAL REMOVAL RATE IN WIRE ELECTRIC DISCHARGE MACHINING

Authors

  • Anandkumar R. Patel With the growth of industries, the need for advanced material has increased. WEDM is a non-conventional machining method that for machining of Special Steel. WEDM is a better choice as to easy control and can machine complex shapes. The aim is to study the effect of WEDM input variables like pulse on and pulse off time, also voltage on the performance variable like MRR.. Taguchi method will be employed for the work. The research work is expected to assist in finding out the optimum output variable that will lead to maximum MRR
  • Kirankumar A. Patel Lecturer, Mechanical Engineering, LDRP-ITR, Gujarat, India

Keywords:

WEDM, Pulse on and Pulse off time, Sr.Voltage, MRR

Abstract

With the growth of industries, the need for advanced material has increased. WEDM is a non-conventional
machining method that for machining of Special Steel. WEDM is a better choice as to easy control and can machine
complex shapes. The aim is to study the effect of WEDM input variables like pulse on and pulse off time, also voltage on
the performance variable like MRR.. Taguchi method will be employed for the work. The research work is expected to
assist in finding out the optimum output variable that will lead to maximum MRR,

Downloads

Published

2018-03-25

How to Cite

Anandkumar R. Patel, & Kirankumar A. Patel. (2018). OPTIMIZATION OF MATERIAL REMOVAL RATE IN WIRE ELECTRIC DISCHARGE MACHINING . International Journal of Advance Engineering and Research Development (IJAERD), 5(3), 1059–1066. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/2821

Issue

Vol. 5 No. 3 (2018): Volume 5 Issue 3 March 2018

Section

Articles