“Parametric Study on Fractional Diversion Using Quarry Dust & Kota Stone for High Strength Concrete”

Authors

  • Priyank R. Sapariya Student, M.E. Structural Engineering, Darshan Institute of Engineering & Technology, Rajkot
  • Chetan G. Solanki Assistant Professor, Department of Civil Engineering, Darshan Institute of Engineering & Technology, Rajkot

Keywords:

Quarry Dust, Kota Stone, Fine Aggregate, Coarse Aggregate, High Strength

Abstract

Research study includes check the performance of quarry dust and waste kota stone in
concrete as replacement of fine aggregate and coarse aggregate respectively. Experimental investigations are
performed to evaluate concrete containing quarry dust and waste kota stone. Fine aggregate are replaced by
20% and 30%, quarry dust and coarse aggregate are replaced by 0%, 10%, 20%, 30%, 40% and 50% waste
kota stone. The fresh property like slump test and hardened properties like compression strength test, split
tensile strength test, flexural strength test are checked out at required days after curing for the grade of M70.
In the experimental investigation it is found that there is increase in strength.

Downloads

Published

2020-07-25

How to Cite

Priyank R. Sapariya, & Chetan G. Solanki. (2020). “Parametric Study on Fractional Diversion Using Quarry Dust & Kota Stone for High Strength Concrete”. International Journal of Advance Engineering and Research Development (IJAERD), 7(7), 33–38. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/4671

Issue

Vol. 7 No. 7 (2020): Volume: 07, Issue: 07 - July, 2020

Section

Articles