Survey On Design of Hydraulic Press Machine

Authors

  • Janjal Rahul Mechanical Department, GES R.H. Sapat College of Engineering
  • Shikhare Sayali Mechanical Department, GES R.H. Sapat College of Engineering
  • Bobade Sudhir Mechanical Department, GES R.H. Sapat College of Engineering
  • Shinde Priyanka Mechanical Department, GES R.H. Sapat College of Engineering
  • Ghode Manoj Mechanical Department, GES R.H. Sapat College of Engineering

Keywords:

[Massecuite pump, Rotor Tip, Dowel Hydraulic Press, Automated setup, Jig]

Abstract

The project is related to cycle time optimization for press operation of tip on massecuite pump rotor. Rotor
is moving part of this pump, the tips that are inserted at the extreme ends gets wear out. Replacing a rotor is not
economical thus tips that are inserted on the extremities of rotor which can be replaced. This inserting operation is
carried out on ‘Dowel Hydraulic Press’. The process is time consuming and need human efforts. As present the machine
is manual operated and require human efforts so an automated is to be implemented

Downloads

Published

2017-03-25

Issue

Vol. 4 No. 3 (2017): Volume 4 Issue 3 March 2017

Section

Articles

How to Cite

Survey On Design of Hydraulic Press Machine. (2017). International Journal of Advance Engineering and Research Development (IJAERD), 4(3), 198-203. https://ijaerd.org/index.php/IJAERD/article/view/4793

Similar Articles

1-10 of 572

You may also start an advanced similarity search for this article.