Energy Production with Multiple Sources and Line Selection with Jumping Priority for Power Distribution Return Feeding Line.

Authors

  • KhataVira B.E student, Electrical Engineering, Sigma Institute of Engineering, Vadodara
  • Patel Ravi B.E student, Electrical Engineering, Sigma Institute of Engineering, Vadodara
  • KureshiParvez Lecturer, Electrical Engineering Sigma Institute of Engineering Vadodara
  • Mr Deep P Thanki Lecturer, Electrical Engineering Sigma Institute of Engineering Vadodara

Keywords:

8051Microcontrollert ,Microgrid, 7805 voltage regulator IC, Rectifier, Kiel v7,Protius

Abstract

This Project is an attempt for improving the power distribution capacity in rural areas by
developing an off grid portable backup or return power feeding which uses various forms of renewable
energy.The various forms of energy used in this project are solar, wind, grid, battery and DG with their
availability and priority . With the advancements in power, now it is able to harvest energy from sources which
are impossible to harvest using traditional energy conversion methods. In this project, a proposed line and
micro controller for the power management was designed, and then tested. Results show the functionality of the
proposed method of jumping priority with automatic line selection in various condition. Further improvement of
design also be described.

Downloads

Published

2022-08-23

How to Cite

KhataVira, Patel Ravi, KureshiParvez, & Mr Deep P Thanki. (2022). Energy Production with Multiple Sources and Line Selection with Jumping Priority for Power Distribution Return Feeding Line. International Journal of Advance Engineering and Research Development (IJAERD), 4(13), -. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/5943

Issue

Vol. 4 No. 13 (2017): SIEICON-2017 (International Conference on Current Research in Engineering)

Section

Articles