ADAPTIVE TUNED DYNAMIC VIBRATION ABSORBER

Authors

  • Prof.Ms.Shubhangi Kamble Mechanical, Engineering, Government College of Engineering, Jalgaon
  • Prof.A.G.Kamble Mechanical, Engineering, Government College of Engineering, Jalgaon
  • Miss.Mrunal Subhash Karale Mechanical, Engineering, Government College of Engineering, Jalgaon

Keywords:

Vibration absorber, dual cantilever mass, active and passive absorber, an ideal absorber

Abstract

The aim is to investigate the use of a Dynamic Vibration Absorber to control vibration in a beam. Traditional
means of vibration control have involved the use of passive and more recently, active methods. This study is different in that
it involves an adaptive component in the design of vibration absorber using a novel design of cantilever beam mechanism.
The design incorporates the use of two concentrated masses cantilevered from two rods. The adaptive solution is achieved by
moving the two masses along the length of the rod, producing a changing natural frequency for the absorber device. For this
the beam with Young’s modulus of 207*10^(9) Pa, density of 7800Kg/m^(3),width of beam (b)=0.025 m, height of beam
(h)=0.05m & length of beam (l)=1.135 m is used. This system is applied to a frequency range of 30 to 80Hz.

Downloads

Published

2022-08-23

How to Cite

Prof.Ms.Shubhangi Kamble, Prof.A.G.Kamble, & Miss.Mrunal Subhash Karale. (2022). ADAPTIVE TUNED DYNAMIC VIBRATION ABSORBER. International Journal of Advance Engineering and Research Development (IJAERD), 5(18), -. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/6374

Issue

Vol. 5 No. 18 (2018): NCSOSET-2018 (A National Conference On Spectrum Of Opportunities In Science & Engineering Technology)

Section

Articles