Validation of Fracture Parameters using MTS Technology on certain Material.

Authors

  • Niharika Sharma Department of Civil Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India
  • Megha Patel Department of Civil Engineering, Vadodara Institute of Engineering, Vadodara, Gujarat, India

Keywords:

J Intergral, ASTM 1820, SENB, MTS

Abstract

It is important to work with new innovations and technologies with change of time. In similarmanner new
technologies can be used for carrying out validation of certain problems. It was conducted to investigate the effect of
specimen size on fracture toughness of mild steel. In this experiment, the specimen geometry was taken as a main
parameter to calculate the fracture toughness of mild steel. Thickness and Notch depth ratio these two parameters were
considered under specimen size. Specimen Geometry was referred from ASTM 1820 Standard code

Downloads

Published

2022-08-23

How to Cite

Niharika Sharma, & Megha Patel. (2022). Validation of Fracture Parameters using MTS Technology on certain Material. International Journal of Advance Engineering and Research Development (IJAERD), 5(15), -. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/6383

Issue

Vol. 5 No. 15 (2018): NANO-2018 (Conference of Nanotechnology & Applications In Civil Engineering)

Section

Articles