REVIEW ON FLY OUT ACCIDENT DURING LATHE MACHINING OPERATION

Authors

  • Prof. Chetan. P. Patil ssistant Professor, Department of Mechanical Engineering, Siddhivinayak Technical Campus, Shegaon
  • Mr. Pankaj P. Bhagat Department of Mechanical Engineering, Siddhivinayak Technical Campus, Shegaon
  • Mr. Mayur S. Belokar Department of Mechanical Engineering, Siddhivinayak Technical Campus, Shegaon
  • Mr. Rahul K. Rathod Department of Mechanical Engineering, Siddhivinayak Technical Campus, Shegaon
  • Miss. Rina H. Asatkar Department of Mechanical Engineering, Siddhivinayak Technical Campus, Shegaon

Keywords:

fly-out, iteration, intervention, lathe, machine, FTA, Monte Carlo Simulation

Abstract

Fly-outs are identified as the most happening accidents in lathe machining. This study aims at determining the
causal factors leading to fly-out accidents during lathe machining operations and also determine the probability of
occurrence of fly-out accident. Fault tree analysis (FTA) was used to identify risk factors for any field of work. Boolean
algebra equations were used to analyze the probability of fault occurrence. Monte Carlo simulation was carried out using
Open FTA software and the output of 1000 iterations was compared with the output of Boolean algebra. Safety intervention
alternatives were evaluated by comparative analysis of before and after implementation of safety measures.

Downloads

Published

2022-08-23

How to Cite

Prof. Chetan. P. Patil, Mr. Pankaj P. Bhagat, Mr. Mayur S. Belokar, Mr. Rahul K. Rathod, & Miss. Rina H. Asatkar. (2022). REVIEW ON FLY OUT ACCIDENT DURING LATHE MACHINING OPERATION. International Journal of Advance Engineering and Research Development (IJAERD), 5(18), -. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/6384

Issue

Vol. 5 No. 18 (2018): NCSOSET-2018 (A National Conference On Spectrum Of Opportunities In Science & Engineering Technology)

Section

Articles