PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING HARD TURNING OF INCONEL 625

Authors

  • Mr. Puneet S. Varade Department of Mechanical Engineering (CAD/CAM), LJIET, Ahmedabad
  • Mr. Kamlesh P. Kadia Department of Mechanical Engineering (CAD/CAM), LJIET, Ahmedabad

Keywords:

Inconel 625, CBN cutting tool, Tagichi, Regression analysis, Grey relational analysis.

Abstract

In this thesis an experimental investigation done about the effect on Inconel 625 during hard turning using
cubic boron nitride (CBN) based ceramic cutting tool. Turning experiments were carried out at different cutting speeds,
feed rates and depth of cut. Tool performance was evaluated with respect to temperature, cutting forces, surface
roughness and material removal rate generated during turning.
The effect of cutting speed, depth of cut and feed rate on temperature, cutting forces, surface roughness and
material removal rate during hard turning of Inconel 625 was experimented and analyzed by using taguchi method. Than
optimize the temperature, cutting forces, surface roughness and material removal rate using analysis of variance
(ANOVA) technique, Regression analysis and Grey Relational Analysis (GRA) method.

Downloads

Published

2015-05-25

How to Cite

Mr. Puneet S. Varade, & Mr. Kamlesh P. Kadia. (2015). PARAMETRIC OPTIMIZATION OF MACHINING PARAMETER DURING HARD TURNING OF INCONEL 625. International Journal of Advance Engineering and Research Development (IJAERD), 2(5), 50–57. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/758

Issue

Vol. 2 No. 5 (2015): Volume 2 Issue 5, May 2015

Section

Articles