A REVIEW PAPER ON LATEST TREND ON FACE MILLING TOOL

Authors

  • B.R.Dabhi P.G.Student, M.E.(Cad/Cam), Atmiya institute of technology and science,Rajkot
  • K.V.Parmar Assist.Prof, Mechanical Department, Atmiya institute of technology and science,Rajkot

Keywords:

Tool life, feed rate, depth of cut, cutting speed,Optimization, Response surface Methodology

Abstract

The paper explains about tool life, life of tool can be increased by proper selection of process parameters, geometry
parameters, and machining parameters. The design of experiment has been used to study the effect of the main milling
parameters such as feed rate, cutting speed, and depth of cut for tool life. Limiting factors to be consider are area for face
milling and depth of slot. A tool life relational equation is developed according to Taylor Tool life equation and tool life is
calculated. The effect of these parameters on the surface roughness has to be investigated by using Response Surface
Methodology (RSM). Thus by Analyzing experimental and theoretically data optimization of process parameters are to be
carried out.

Downloads

Published

2015-01-25

Issue

Vol. 2 No. 1 (2015): Volume 2 Issue 1, January 2015

Section

Articles

How to Cite

A REVIEW PAPER ON LATEST TREND ON FACE MILLING TOOL. (2015). International Journal of Advance Engineering and Research Development (IJAERD), 2(1), 59-61. https://ijaerd.org/index.php/IJAERD/article/view/441

Similar Articles

1-10 of 2404

You may also start an advanced similarity search for this article.