Design and Development of Machine to Perform Stamping and Cutting Operation

Authors

  • Rakesh Prajapati Department of Mechanical Engineering, Parul Institute of Technology
  • Purvik Patel Department of Mechanical Engineering, Parul Institute of Engineering & Technology
  • Saurabh Modi Department of Mechanical Engineering, Parul Institute of Technology

Keywords:

Crank and Lever Mechanism, Geneva Wheel, Sprockets, Roller chain, Coil Spring, Shaft

Abstract

The design and fabrication of paper cutting machine using Geneva mechanism is very useful to cut papers
in equal and accurate dimensions. Geneva drive is an indexing mechanism that converts the continuous motion into
intermittent motion. By means of this mechanism the continuous rotary motion of the sprocket wheel is converted into
intermittent rotary motion of roller. Due to the intermittent motion, the paper is moved between the time intervals of
cutting periods. Then the paper cutting is achieved by the crank and lever mechanism. The sprocket will act as a crank,
and then the cutter will act as a lever. These two links are connected by a connecting link. The cutter will be back to its
original position by the spring effect.

Downloads

Published

2022-08-23

How to Cite

Rakesh Prajapati, Purvik Patel, & Saurabh Modi. (2022). Design and Development of Machine to Perform Stamping and Cutting Operation. International Journal of Advance Engineering and Research Development (IJAERD), 4(13), -. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/6061

Issue

Vol. 4 No. 13 (2017): SIEICON-2017 (International Conference on Current Research in Engineering)

Section

Articles