MODELING, ANALYSIS AND OPTIMIZATION OF A MACHINE TOOL STRUCTURES

Authors

  • Mr. Hitesh R.Raiyani Department of Mechanical Engineering (CAD/CAM), LJIET, Ahmedabad
  • Ms. Neha B. Joshi Department of Mechanical Engineering (CAD/CAM), LJIET, Ahmedabad

Keywords:

– Structure Material, Structural Bionic Design, Column Stiffeners Arrangement, Parametric Optimization .

Abstract

This paper works on some of current development of design, analysis and optimization of machine tool
column structures. Column, bad, box type housings, table, x-slide, y-slide, z-slides are known as structures of machine
tool. In the new economic year and globalization phase, industries are required to manufacture good quality machine
tools with optimized performance at the moderate cost. Machine tool structures are the key for quality and high
productivity. Moreover, the industries are facing competition internationally due to worldwide globalization of business.
One of the primary reasons for low productivity is large mass of the moving parts of machine tools which cannot afford
high acceleration and deceleration encounter during operation. In this work is made to solve the problem regards
machine tool structures or machine tool industries.

Downloads

Published

2015-05-25

How to Cite

Mr. Hitesh R.Raiyani, & Ms. Neha B. Joshi. (2015). MODELING, ANALYSIS AND OPTIMIZATION OF A MACHINE TOOL STRUCTURES. International Journal of Advance Engineering and Research Development (IJAERD), 2(5), 349–357. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/853

Issue

Vol. 2 No. 5 (2015): Volume 2 Issue 5, May 2015

Section

Articles