Validation of Temperature Effect on Lubricating oil for 4-Speed Automobile Gear box

Authors

  • Bindiya .A. Parikh PG Student, L.D.College of Engineering ,Mechanical Department, bindiyaparikh1212@gmail.com
  • Prof. S.K. Dabhi Mechanical Department, L.D College of Engineering,, Gujarat Technological University
  • Prof.N.J.Parekh Mechanical Department, Hasmukh Goswami College of Engineering, Gujarat Technological University

Keywords:

Viscosity ,Temperature, different oils, oil validation

Abstract

In automobile different power losses are occurring. Power loss due to air drag is
proportional to the square of vehicle’s speed. Out of the total power in engine, 25% of power is
available at crank shaft. Out of this 25% of power, 4% is used up by accessories, 9% by friction and
slippage in the mechanical system (transmission and differential) and only 12% of the fuel energy to
be delivered to the wheels. Thermal analysis of gear box is carried out for different viscosity oils. For
the analysis purpose design of maruti Omni’s gear box is used. Comparison of thermal a nalysis is
done for different viscosity oils.SAE 85W 140,SAE 80W 90,SAE 75W 90,SAE EDIB (Suggested
Oil).

Downloads

Published

2014-05-25

Issue

Vol. 1 No. 5 (2014): Volume 1 Issue 5 (May-2014)

Section

Articles

How to Cite

Validation of Temperature Effect on Lubricating oil for 4-Speed Automobile Gear box. (2014). International Journal of Advance Engineering and Research Development (IJAERD), 1(5), 586-591. https://ijaerd.org/index.php/IJAERD/article/view/112

Similar Articles

1-10 of 741

You may also start an advanced similarity search for this article.