Influence of Coolant in CNC machining

Authors

  • Gaurav M. Gohane Asst. Professor, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • Atish kr.Gupta UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • Atulya R. Sharma UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • G. Rohit Pillai UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • Shubham V. Khade UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur

Keywords:

machining, surface finish, oil, tool life, temperature, heat energy, lubrication, cooling

Abstract

cooling is simply the process of taking some of the heat energy away .There are different ways to cool the
things. In machining operations cooling plays very important parameter. Without cooling various operations cannot
perform efficiently. In the study, the machining process is carried out by insert folder material as stainless steel with
insert. The machining operations were carried out in the different machining environments. As we had studied the effects
of cooling with CO2 by dry and conventional wet machining in spite cutting temperature. Then we found that cryogenic
machining is an effective matter to minimize the cutting temperature found during the machining process. The conclusion
of this study is very helpful for the industry and also it improves the productivity.

Downloads

Published

2018-03-25

How to Cite

Gaurav M. Gohane, Atish kr.Gupta, Atulya R. Sharma, G. Rohit Pillai, & Shubham V. Khade. (2018). Influence of Coolant in CNC machining. International Journal of Advance Engineering and Research Development (IJAERD), 5(3), 604–607. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/2731

Issue

Vol. 5 No. 3 (2018): Volume 5 Issue 3 March 2018

Section

Articles

Most read articles by the same author(s)