Study of Parameters Affecting Tool Life

Authors

  • Gaurav M. Gohane Asst. Professor, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • Atulya R. Sharma UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • G. Rohit Pillai UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • Kunal D. Itankar UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur
  • Himanshu Kumar UG Scholar, Dept. of Mechanical Engineering, JD College of Engineering and Management, Nagpur

Keywords:

tool, cutting, fluid, angle, oil, machining, emulsion, curve, tool life, temperature

Abstract

 In order to shape the metal into required form and to get the good dimensional tolerances machining is an
important aspect in the field of manufacturing. Chip, cutting tool and Work piece are thee three basic elements in which
the cutting tool is one of the major considerable factors. In Manufacturing Industry during machining operations the tool
wear is a major problem encountered. Tool life prediction has a great influence on productivity industrial activities.
Manufacturing cost and operation time is intended to reduce by the High material removal rate, while the productivity in
terms of machining cost and operation time for an expected work piece strongly depends on tool wear. Feed rate has the
most significant effect on tool life followed by spindle speed and depth of cut.

Downloads

Published

2018-03-25

How to Cite

Gaurav M. Gohane, Atulya R. Sharma, G. Rohit Pillai, Kunal D. Itankar, & Himanshu Kumar. (2018). Study of Parameters Affecting Tool Life. International Journal of Advance Engineering and Research Development (IJAERD), 5(3), 252–256. Retrieved from https://ijaerd.org/index.php/IJAERD/article/view/5463

Issue

Vol. 5 No. 3 (2018): Volume 5 Issue 3 March 2018

Section

Articles

Most read articles by the same author(s)