Viewing Issue
Vol. 2, Issue 5 — May 2015
211 papers
📚
Published Papers — 211 papers
[16]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1143
Study of Simple Load Flow Technique for Distribution System
[17]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1144
ADDITION OF CRUSH WASTE GLASS PARTICLES AS PARTIAL REPLACEMENT OF FINE AGGREGATES IN CONCRETE
[18]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1145
Flow Control Loop Analysis for System Modeling & Identification
[19]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1146
Mel-Frequency Cepstral Coefficients for Speaker Recognition : A Review
[20]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1147
Road Accidents Analysis and Identification Black Spots on Dahod to Jhalod Section of NH-113
[21]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1148
Reduce Energy Consumption in Data Aggregation Using Homomorphic Technique in Wireless Sensor Network
[22]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-0767
Green Building : A Case study of New Paryavaran Bhavan
[23]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1149
Study and Analysis of Various Parameters Affecting Nugget Formation in Resistance Spot Welding Using FEM
[24]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1150
Design Analysis and Optimization of Parallel Motion Fender
[25]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1151
Improved Direct Torque Control Strategies for Low Speed Range Operation of Induction Motor Drives
[26]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1152
Time Reduction and Analysis of Machining Process for Differential Case
[27]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1153
AN INVESTIGATION OF TENSILE STRENGTH, HARDNESS AND HAZ OF DISSIMILLAR MATERIALS SS3041 & KOVAR ALLOY BY LASER WELDING
[28]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1154
Effects of Impeller Blade Angle on the Efficiency of Water Type Centrifugal Pump and its CFD Analysis
[29]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1155
CONTROL OF PARALLEL CONNECTED BIDIRECTIONAL AC-DC CONVERTER
[30]
Vol. 2, Issue 5 | May 2015 | Paper ID: IJAERD-OJS-1156
TIME-BASED ALL-DIGITAL TECHNIQUE FOR ANALOGBUILT-IN SELFTEST








