ADAPTIVE TUNED DYNAMIC VIBRATION ABSORBER
| Author(s) | : | Prof.Ms.Shubhangi Kamble, Prof.A.G.Kamble, Miss.Mrunal Subhash Karale |
| Institution | : | Mechanical, Engineering, Government College of Engineering, Jalgaon |
| Published In | : | Vol. 5, Issue 18 — January 2018 |
| Page No. | : | - |
| Domain | : | Engineering |
| Type | : | Research Paper |
| ISSN (Online) | : | 2348-4470 |
| ISSN (Print) | : | 2348-6406 |
The aim is to investigate the use of a Dynamic Vibration Absorber to control vibration in a beam. Traditionalmeans of vibration control have involved the use of passive and more recently, active methods. This study is different in thatit involves an adaptive component in the design of vibration absorber using a novel design of cantilever beam mechanism.The design incorporates the use of two concentrated masses cantilevered from two rods. The adaptive solution is achieved bymoving the two masses along the length of the rod, producing a changing natural frequency for the absorber device. For thisthe beam with Young’s modulus of 207*10^(9) Pa, density of 7800Kg/m^(3),width of beam (b)=0.025 m, height of beam(h)=0.05m & length of beam (l)=1.135 m is used. This system is applied to a frequency range of 30 to 80Hz.
Prof.Ms.Shubhangi Kamble, Prof.A.G.Kamble, Miss.Mrunal Subhash Karale, “ADAPTIVE TUNED DYNAMIC VIBRATION ABSORBER”, International Journal of Advance Engineering and Research Development (IJAERD), Vol. 5, Issue 18, pp. -, January 2018.
